NodeMCU is an open-source Lua based firmware and development board specially targeted for IoT based Applications. It includes firmware that runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module.
- You cannot add "ESP32-CAM WiFi+Bluetooth" to the cart because the product is out of stock.
Description
The NodeMCU ESP8266 development board comes with the ESP-12E module containing ESP8266 chip having Tensilica Xtensa 32-bit LX106 RISC microprocessor. This microprocessor supports RTOS and operates at 80MHz to 160 MHz adjustable clock frequency. NodeMCU has 128 KB RAM and 4MB of Flash memory to store data and programs. Its high processing power with in-built Wi-Fi / Bluetooth and Deep Sleep Operating features make it ideal for IoT projects.
NodeMCU can be powered using Micro USB jack and VIN pin (External Supply Pin). It supports UART, SPI, and I2C interface.
NodeMCU Pinout
| Pin Category | Name | Description |
| Power | Micro-USB, 3.3V, GND, Vin | Micro-USB: NodeMCU can be powered through the USB port 3.3V: Regulated 3.3V can be supplied to this pin to power the board GND: Ground pins Vin: External Power Supply |
| Control Pins | EN, RST | The pin and the button resets the microcontroller |
| Analog Pin | A0 | Used to measure analog voltage in the range of 0-3.3V |
| GPIO Pins | GPIO1 to GPIO16 | NodeMCU has 16 general purpose input-output pins on its board |
| SPI Pins | SD1, CMD, SD0, CLK | NodeMCU has four pins available for SPI communication. |
| UART Pins | TXD0, RXD0, TXD2, RXD2 | NodeMCU has two UART interfaces, UART0 (RXD0 & TXD0) and UART1 (RXD1 & TXD1). UART1 is used to upload the firmware/program. |
| I2C Pins | NodeMCU has I2C functionality support but due to the internal functionality of these pins, you have to find which pin is I2C. |
Additional information
| USB Driver | CH340, CP2102 |
|---|---|
| Antenna | PCB Trace, U.FL socket |
Technical Specification
| Operation Voltage | 3.3V |
| Input Voltage | 7V to 12V |
| Microcontroller | Tensilica 32-bit RISC CPU Xtensa LX106 |
| Digital I/O Pins | 16 |
| Analog Input Pins | 1 |
| UARTs | 1 |
| SPIs | 1 |
| I2Cs | 1 |
| Flash Memory | 4MB |
| SRAM | 64KB |
Download
- Datasheet
- Sample for test
- http://arduino.esp8266.com/stable/package_esp8266com_index.json
Related products
-
-
$7.00ESP8266 Serial Wifi Module NodeMCU Lua Wifi V3 CH340 4M (External Antenna) Features NodeMCU is a Wi-Fi card designed to be used in IoT projects. It is based on an ESP8266 circuit and all its pins are available. In addition, a voltage regulator has been added, as well as a […]
-
$3.00The CNC Shield v4 is made for the control of 3D printers, milling and engraving machines. This version of the shield has 1 motor driver less than its predecessor, but is more compact and has room for an Arduino Nano. This board has 3 sockets for the installation of stepper motor drivers such as the A4988. Only 2 channels per motor are required to control this motor. There is also a connection for 2 end-stop switches per motor.
-
Out of Stock
$8.50ESP32-CAM is a low-cost ESP32-based development board with onboard camera, small in size. It is an ideal solution for IoT application, prototypes constructions and DIY projects. The board integrates WiFi, traditional Bluetooth and low power BLE , with 2 high-performance 32-bit LX6 CPUs. It adopts 7-stage pipeline architecture, on-chip sensor, […]
Reviews
There are no reviews yet.