Module is used where short distance wireless communication is needed. The module is used for wireless communications of less than 100 meters. The module is preferred where power consumption is issue. HM-10 MODULE is designed by BLE chip so it consumes very less power to function. So the module can be used on mobile systems. The module uses UART communication and so it can be interfaced with almost all controllers or processors.
Out of stock
Description
The HM-10 is a readily available Bluetooth 4.0 module. This module is used for establishing wireless data communication. The module is designed by using the Texas Instruments CC2540 or CC2541 Bluetooth low energy (BLE) System on Chip (SoC). The module design and firmware originated from the Jinan Huamao Technology Company.
HM-10 Pinout
| Pin Number | Pin Name | Description |
| 1 | UART_TX | UART interface-Transmit |
| 2 | UART_RX | UART interface-Receive |
| 3 | UART_CTS | UART interface |
| 4 | UART_RTS | UART interface |
| 5 | NC | No Connection |
| 6 | NC | No Connection |
| 7 | NC | No Connection |
| 8 | NC | No Connection |
| 9 | NC | No Connection |
| 10 | NC | No Connection |
| 11 | RESETB | Reset if low for 100ms |
| 12 | VCC | 3.3V |
| 13 | GND | Ground |
| 14 | GND | Ground |
| 15 | USB_D- | USB interface |
| 16 | NC | No Connection |
| 17 | NC | No Connection |
| 18 | NC | No Connection |
| 19 | NC | No Connection |
| 20 | USB_D+ | USB interface |
| 21 | GND | Ground |
| 22 | GND | Ground |
| 23 | PIO0 | System Key |
| 24 | PIO1 | System LED |
| 25 | PIO2 | Programmable input/output line |
| 26 | PIO3 | Programmable input/output line |
| 27 | PIO4 | Programmable input/output line |
| 28 | PIO5 | Programmable input/output line |
| 29 | PIO6 | Programmable input/output line |
| 30 | PIO7 | Programmable input/output line |
| 31 | PIO8 | Programmable input/output line |
| 32 | PIO9 | Programmable input/output line |
| 33 | PIO10 | Programmable input/output line |
| 34 | PIO11 | Programmable input/output line |
Technical Specification
| Bluetooth Version | Bluetooth 4.0 |
| BLE Chip | CC2541 |
| Send and Receive | No byte limit |
| Working Frequency | 2.4GHz ISM band |
| Communication | UART |
| Range | Open space 100m |
| Operation Voltage | 2.0V to 3.6V |
| Consumes Current | 235uA on battery backup |
Download
Related products
-
$15.00 – $16.50The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega 2560 board is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila.
-
$6.00 – $7.00NodeMCU is an open-source Lua based firmware and development board specially targeted for IoT based Applications. It includes firmware that runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module.
-
Out of Stock
$5.00The LilyPad Arduino is designed for e-textiles and wearables projects. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread.
Out of stock
Reviews
There are no reviews yet.