The RC522 is a 13.56MHz RFID module that is based on the MFRC522 controller from NXP semiconductors. The module can supports I2C, SPI and UART and normally is shipped with a RFID card and key fob. It is commonly used in attendance systems and other person/object identification applications.
RFID MFRC-522 RC522 Module
$5.00
5 in stock
Description
The RC522 is a 13.56MHz RFID module that is based on the MFRC522 controller from NXP semiconductors. The module can supports I2C, SPI and UART and normally is shipped with a RFID card and key fob. It is commonly used in attendance systems and other person/object identification applications.
Pinout
| Pin Number | Pin Name | Description |
| 1 | Vcc | Used to Power the module, typically 3.3V is used |
| 2 | RST | Reset pin – used to reset or power down the module |
| 3 | Ground | Connected to Ground of system |
| 4 | IRQ | Interrupt pin – used to wake up the module when a device comes into range |
| 5 | MISO/SCL/Tx | MISO pin when used for SPI communication, acts as SCL for I2c and Tx for UART. |
| 6 | MOSI | Master out slave in pin for SPI communication |
| 7 | SCK | Serial Clock pin – used to provide clock source |
| 8 | SS/SDA/Rx | Acts as Serial input (SS) for SPI communication, SDA for IIC and Rx during UART |
Technical Specification
| Module | 13.56MHz RFID |
| Operating Voltage | 2.5V to 3.3V |
| Communication | SPI, I2C protocol, UART |
| Maximum Data Rate | 10Mbps |
| Read Range | 5cm |
| Current Consumption | 13 to 26mA |
| Power down mode consumption | 10uA (min) |
Download
Related products
-
Out of Stock
$5.00The LilyPad Arduino is designed for e-textiles and wearables projects. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread.
-
Out of Stock
$23.00The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.
-
$1.25The module (MicroSD Card Adapter) is a Micro SD card reader module, through the file system and the SPI interface driver, SCM system to complete the file to read and write MicroSD card. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read
5 in stock
Reviews
There are no reviews yet.