-
$2.50ATtiny85 8-Bit tinyAVR Microcontrollers The Atmel ATtiny85 Microcontroller is an 8-bit device based on the AVR enhanced RISC architecture. Being an Atmel tinyAVR device the ATtiny85 is packs performance and power efficiency into a small package, perfect for applications where space is at a premium. By executing powerful instructions in […]
-
$4.00TCS230 8-pin SOIC surface mount package, on a single chip has 64 photodiodes. These diodes are divided into four types. 16 of the photodiode with a red filter; 16 photodiodes with a green filter; 16 photodiodes with a blue filter; the remaining 16 without any filter, may all the optical […]
-
-
$1.00Specification of Mini MP1584EN DC-DC BUCK Adjustable Step Down Module: Model:MP1584 Name: DC-DC step-down module Input Voltage: 4.5V ~ 28V Output voltage: 0.8V ~ 20V Output Current: 3A (Max) Conversion efficiency: 96% (maximum) Output Ripple: <30mV Switching frequency: 1.5MHz (highest) typically 1MHz Operating Temperature: -45°C ~ +85°C Size: 22mm * […]
-
Select options This product has multiple variants. The options may be chosen on the product page Quick View$8.50Features: It can protect the charging batteries when short circuit happens. It can support combined use for three parallel charging boards (means you can charge eighteen batteries which have the same characters simultaneously). It has 2OZ-thick copper foil, so it can withstand continual current of 80A. It can prevent each […]
Select options This product has multiple variants. The options may be chosen on the product page -
Select options This product has multiple variants. The options may be chosen on the product page Quick View$1.25 – $2.50GT3 Rubber Timing Belt Close Loop Width 10mm
Select options This product has multiple variants. The options may be chosen on the product page -
Select options This product has multiple variants. The options may be chosen on the product page Quick View$3.00 – $7.50Load Cell Weight Sensor 1Kg, 2Kg, 3Kg, 5Kg, 10Kg, 20Kg, 50Kg, 100Kg, 200Kg
Select options This product has multiple variants. The options may be chosen on the product page -
Select options This product has multiple variants. The options may be chosen on the product page Quick View$11.00 – $27.50Hobbywing Skywalker ESC Speed Control with UBEC For RC Airplane , Drone
Select options This product has multiple variants. The options may be chosen on the product page -
Select options This product has multiple variants. The options may be chosen on the product page Quick View$0.50 – $1.75Airplane Aircraft Wheels Items Description :
Select options This product has multiple variants. The options may be chosen on the product page -
-
$1.50LM393 Sound Detection Sensor Sound Detection Sensor Module provides an easy way to detect sound and is generally used for detecting sound intensity. This module can be used for security, switch, and monitoring applications. Its accuracy can be easily adjusted for the convenience of usage. It uses a microphone that […]
-
-
Select options This product has multiple variants. The options may be chosen on the product page Quick View$6.00 – $8.50Arduino Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0), a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.. You can tinker with your Uno without worrying too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.
Select options This product has multiple variants. The options may be chosen on the product page -
$1.50Features Double sided tape on back of breadboard Comes in white for that clean look (not transparent) 400 tie-points total: 300 tie-point IC-circuit area plus two 50 tie-point distribution strips providing 4 power rails Distribution strips are removable Size 3.85×8.2×0.85 (cm) Coloured coordinates for easy component placement Accepts a variety […]
-
-
$3.00Open-builds V Gantry Plate 2020 V-Slot Aluminum Profile Slider Plate No Wheel CNC Part 3D Printer Wheel Roller
-
-
-
Concept
Bridge Cable Robot
Cable Inspection Robot is a research project by ArrowDot Company with function to check the quality of cable for bridge which can be used for Neak Loeung Bridge, New Balay Bridge and planned Koh Pich-Koh Norea Bridge. This robot equipped with analyzed camera that can view the cracked point and the vibration level of the cable. Last but not least, this robot can be remote and live up to 500m wirelessly.
