Over 10 years experience
Robotic Store
8am-5pm
Working Time
Market Price
Good Products
Mon-Sun
Working Days
We live to save time
Fast Delivery
-
$15.00 – $16.50
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega 2560 board is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila.
-
$4.00
SPECIFICATION Input voltage: DC 12V-40V, power: 0.01-400W, current: rated current 8A, large through current 10A, quiescent current 0.02A (standby state), frequency: 13khz, PWM pulse width speed regulation range: 10%-100%. Equipped with 10A fuse, with power supply reverse connection, control voltage overvoltage protection function, equipped with high-quality potentiometer, suitable for DC […]
-
$5.00
XH-M603 Charging Control Module 12-24V Storage Lithium Battery Charger Control Switch Protection Board Product Introduction: 1.Model:XH-M603 2.Input Voltage:DC 10-30V 3.Display Precision:0.1V 4.Control Precision:0.1V 5.Output Type:direct output 6.Voltage Tolerance:+/-0.1V 7.Application Fields:12-24V storage battery 8.Size;82*58*18mm Using Method: 1.Set Starting Voltage:in normal display voltage state,press the button will display start charging voltage;long press […]
-
$8.50
Features: It can protect the charging batteries when short circuit happens. It can support combined use for three parallel charging boards (means you can charge eighteen batteries which have the same characters simultaneously). It has 2OZ-thick copper foil, so it can withstand continual current of 80A. It can prevent each […]
-
$0.13 – $0.63
Capacitor Electrolytic 16V Items Descriptions : Items Name Size 16V 1UF 3x5mm 16V 10UF 3x5mm 16V 22UF 3x5mm 16V 33UF 4x7mm 16V 47UF 4x7mm 16V 100UF 5x7mm 16V 220UF 6x7mm 16V 470UF 8x7mm 16V 680UF 8x12mm 16V 1000UF 8x12mm 16V 2200UF 10x20mm 16V 3000UF 10x20mm 16V 4700UF 13x25mm 16V 6800UF […]
-
$3.50
L293D Motor Driver Module Board DC 4.5V – 16V Shield For Arduino Items Description L293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the […]
-
$1.15
Items Description This is another great IIC/I²C/TWI/SPI Serial Interface. As the pin resources of controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I²C interface module, you will be able to […]
-
$8.00
Hall Current Sensor CJMCU-758 Linear Current Sensor Output Voltage Proportional AC or DC Current Working voltage: 3 -5V (MAX 8 V) Static output voltage: VCC/2 Working current: 13.5mA (MAX) Storage temperature range: -65°C -165°C The maximum output current (VIOUT-GND): 3mA Internal bandwidth: 120KHz Module size: 37mm * 18mm Feature: Industry-leading noise […]
Concept
Bridge Cable Robot
Cable Inspection Robot is a research project by ArrowDot Company with function to check the quality of cable for bridge which can be used for Neak Loeung Bridge, New Balay Bridge and planned Koh Pich-Koh Norea Bridge. This robot equipped with analyzed camera that can view the cracked point and the vibration level of the cable. Last but not least, this robot can be remote and live up to 500m wirelessly.
![robot-693x1024 (3)](https://store.arrowdot.io/wp-content/uploads/2023/08/robot-693x1024-3.png)