$1.50
AD16-22SM Red 6VDC
AD16-22SM Yellow 6VDC
AD16-22SM Green 6VDC
AD16-22SM Red 12VDC
AD16-22SM Yellow 12VDC
AD16-22SM Green 12VDC
AD16-22SM Red 24VDC
AD16-22SM Yellow 24VDC
AD16-22SM Green 24VDC
AD16-22SM Red 220VAC
AD16-22SM Yellow 220VAC
AD16-22SM Green 220VAC
| AD16-16SM | 6VDC, 12VDC, 24VDC, 220VAC |
|---|---|
| Color | Green, Red, Yellow |
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega 2560 board is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila.
Out of Stock
CNC Shield V3.0 can be used as drive expansion board for engraving machine, 3D printer and other devices. There’re 4 slots in the board for stepper motor drive modules, can drive 4 stepper motors, and each step stepper motor only need two IO port, that is to say, 6 IO ports can quite well to manage three stepper motor, it’s very convenient to use. After insert Arduino CNC Shield V3.0 into Arduino UNO, and installed GRBL firmware then you can quickly DIY a CNC engraving machine.
Out of Stock
The LilyPad Arduino is designed for e-textiles and wearables projects. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread.
The DRV8825 is a Motor Driver with two H-bridge drivers and a microstepping indexer. The driver has a maximum output capacity of 45 V and ± 2.5 A. It can operate bipolar stepper motors in full, 1/2, 1/4, 1/8, 1/16 and 1/32-step modes. This driver module is generally used in Robotics, ATMs and Gaming Machines.
Reviews
There are no reviews yet.