PN532 is NFC RFID (Radio Frequency Identification) module. This module is built around NXP PN532 IC. NXP PN532 IC is very popular in NFC applications.
NXP PN532 NFC RFID Module
$7.50
5 in stock
Description
We recently hear a lot about NFC. This feature is available in the latest high end smart phones present in the market. NFC stands for Near Field Communication. NFC is a protocol designed for smart phones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters. This type of communication is needed for simple and fast data exchange between devices.
And for engineers and hobbyists it is another important communication method. And for establishing this NFC communication we can use this PN532 MODULE. This module acts a modem to send and receive data.
PN532 is NFC RFID (Radio Frequency Identification) module. This module is built around NXP PN532 IC. NXP PN532 IC is very popular in NFC applications.
Pinout
| Pin Number | Description |
| VCC | Should be power source. |
| GND | Should be connected to ground. |
| SDA/TXD | SDA: Serial Data pin[I2C Interface]
TXD: Transmit pin[UART Interface] |
| SCL/RXD | SCL: Serial Clock pin[I2C Interface]
RXD: Receive pin [UART Interface] |
| SCK | Serial Clock pin [SPI Interface] |
| MISO | Master Input Slave Output pin [SPI Interface] |
| MOSI | Master Output Slave Input pin [SPI Interface] |
| SS | Slave Select pin [SPI Interface] |
| IRQ | Interrupt Signal pin [SPI Interface] |
| RSTO | Reset pin |
Technical Specification
| Microcontroller | 80C51 microcontroller core with 40 Kbyte ROM and 1 Kbyte RAM |
| Operating Voltage | 2.7V to 5.5V |
| Contactless communication | 13.56MHz |
| Hard-Power-Down mode | 1µA |
| Soft-Power-Down mode | 22µA |
| Range | 5cm to7cm |
| RFID reader/writer mode support | MIFARE 1k, 4k, Ultra light, and DESFIRE cards, ISO/IEC 14443-4 cards such as CD97BX, CD light, DESFIRE, P5CN072 (SMX), INNOVISION Jewel cards such as IRT5001 card, FELICA cards such as RCS_860 and RCS_854 |
| Communication | SPI Interface, I2C Interface and High Speed Serial UART |
Download
Related products
-
Out of Stock
$23.00The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.
-
Out of Stock
$3.00CNC Shield V3.0 can be used as drive expansion board for engraving machine, 3D printer and other devices. There’re 4 slots in the board for stepper motor drive modules, can drive 4 stepper motors, and each step stepper motor only need two IO port, that is to say, 6 IO ports can quite well to manage three stepper motor, it’s very convenient to use. After insert Arduino CNC Shield V3.0 into Arduino UNO, and installed GRBL firmware then you can quickly DIY a CNC engraving machine.
-
$6.50The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
5 in stock
Reviews
There are no reviews yet.