-
-
Select options This product has multiple variants. The options may be chosen on the product page Quick View$1.50AD16-22SM Red 6VDC AD16-22SM Yellow 6VDC AD16-22SM Green 6VDC AD16-22SM Red 12VDC AD16-22SM Yellow 12VDC AD16-22SM Green 12VDC AD16-22SM Red 24VDC AD16-22SM Yellow 24VDC AD16-22SM Green 24VDC AD16-22SM Red 220VAC AD16-22SM Yellow 220VAC AD16-22SM Green 220VAC
Select options This product has multiple variants. The options may be chosen on the product page -
Select options This product has multiple variants. The options may be chosen on the product page Quick View$0.19 – $1.03XH 2.54mm Wire Cable Connector Single Head Female 10CM
Select options This product has multiple variants. The options may be chosen on the product page -
$4.25Specification: Clock speed: 16 MHz Flash memory: 32 KB 32 line output/input The JTAG interface Two 8-bit Counters One 16-bit counter Four channel PWM 8 channels 10-bit Converter analog-to-digital Hardware network interfaces: USART, SPI Six sleep modes Power Requirements: 2.7 V – 5.5 V Case DIP40
-
$3.50Specification Attribute Value Family Name PIC16F Package Type PDIP Mounting Type Through Hole Pin Count 40 Device Core PIC Data Bus Width 8bit Program Memory Size 14.3 kB, 256 B Maximum Frequency 20MHz RAM Size 368 B USB Channels 0 Number of PWM Units 2 x 10 bit Number of […]
-
$1.50Features Double sided tape on back of breadboard Comes in white for that clean look (not transparent) 400 tie-points total: 300 tie-point IC-circuit area plus two 50 tie-point distribution strips providing 4 power rails Distribution strips are removable Size 3.85×8.2×0.85 (cm) Coloured coordinates for easy component placement Accepts a variety […]
-
-
$8.00Hall Current Sensor CJMCU-758 Linear Current Sensor Output Voltage Proportional AC or DC Current Working voltage: 3 -5V (MAX 8 V) Static output voltage: VCC/2 Working current: 13.5mA (MAX) Storage temperature range: -65°C -165°C The maximum output current (VIOUT-GND): 3mA Internal bandwidth: 120KHz Module size: 37mm * 18mm Feature: Industry-leading noise […]
-
-
$1.50LM393 Sound Detection Sensor Sound Detection Sensor Module provides an easy way to detect sound and is generally used for detecting sound intensity. This module can be used for security, switch, and monitoring applications. Its accuracy can be easily adjusted for the convenience of usage. It uses a microphone that […]
-
Select options This product has multiple variants. The options may be chosen on the product page Quick View$1.25AD16-16SM Red 6VDC AD16-16SM Yellow 6VDC AD16-16SM Green 6VDC AD16-16SM Red 12VDC AD16-16SM Yellow 12VDC AD16-16SM Green 12VDC AD16-16SM Red 24VDC AD16-16SM Yellow 24VDC AD16-16SM Green 24VDC AD16-16SM Red 220VAC AD16-16SM Yellow 220VAC AD16-16SM Green 220VAC
Select options This product has multiple variants. The options may be chosen on the product page -
Select options This product has multiple variants. The options may be chosen on the product page Quick View$1.008×8 Matrix Dot RED LED 5.0mm
Select options This product has multiple variants. The options may be chosen on the product page -
Select options This product has multiple variants. The options may be chosen on the product page Quick View$0.30 – $2.0074LS48 BCD to 7segment 74LS47 BCD to 7segment 74HC595 Driver 7segment 8bits 74LS73 Dual JK Flip Flop 74LS74 D Flip Flip 74LS90BCD Counter 74LS00 Logic Gates NAND 74LS02 Logic Gates NOR 74LS04 Logic Gates NOT 74LS08 Logic Gates AND 74LS32 Logic Gates OR 74LS86 Logic Gates XOR 74LS83 Binary Adder […]
Select options This product has multiple variants. The options may be chosen on the product page -
Out of Stock
$5.00The LilyPad Arduino is designed for e-textiles and wearables projects. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread.
-
$3.00HX711 Module Load Cell Voltage Amplifier HX711 features dual-channel 24 Bit Precision A/D Weight Pressure Sensor Load Cell Amplifier which is available in a small breakout board. The board has pinouts for the microcontroller and the Load cell in two different directions for the ease of interfacing. It can be […]
-
-
-
-
Select options This product has multiple variants. The options may be chosen on the product page Quick View$0.50 – $1.50IC Chip Driver Series L293D L298N
Select options This product has multiple variants. The options may be chosen on the product page
Concept
Bridge Cable Robot
Cable Inspection Robot is a research project by ArrowDot Company with function to check the quality of cable for bridge which can be used for Neak Loeung Bridge, New Balay Bridge and planned Koh Pich-Koh Norea Bridge. This robot equipped with analyzed camera that can view the cracked point and the vibration level of the cable. Last but not least, this robot can be remote and live up to 500m wirelessly.
