-
-
$3.00Specifications: Over Charge Voltage:4.25-4.35v0.05v Over Discharge Voltage: 2.3-3.0v0.05v Max Peak current: 6-8A Max instantaneous current: 12A Working Temperature: -40~+50 Storage Temperature:-40~+80 Static current: 50000hours Resistance: <100m Charging Voltage: 16.8-17V Short cut Protection:Protectable ,change for repair Size: 7.2×1.3cm/2.83×0.51inch
-
$8.50Features: *switch’ place at the bottom of the adapter. *That is: Switch to AC117V,input voltage must be AC110/120V,voltage converter (output) AC220/240V; Switch to AC230V,input voltage must be AC220/240V,And change the voltage into (output) AC110/120V. *Attention: it will be broken with wrong operation and we will not responsible for the wrong […]
-
$2.00Product Specifications Color RED Wave Length 650nm Operating Voltage 3.0-5V Output Power 58mW Working temperature 36 – 65 Model Number KY-008 Laser Module
-
-
$5.00E18-D80NK IR Obstacle Avoidance Proximity Sensor E18-D80NK adjustable IR Infrared Proximity Sensor Switch features an IR sensor. The E18-D80NK adjustable IR Infrared Proximity Sensor Switch features an IR sensor that can measure distance between 3 to 80 cm. It features an easy to mount chassis, making prototyping much simpler. The […]
-
-
-
Select options This product has multiple variants. The options may be chosen on the product page Quick View$0.30Potentiometer Linear WH148 15mm
Select options This product has multiple variants. The options may be chosen on the product page -
-
$1.25Items Description The module (MicroSD Card Adapter) is a Micro SD card reader module, through the file system and the SPI interface driver, SCM system to complete the file to read and write MicroSD card. Arduino users can directly use the Arduino IDE comes with an SD card to complete […]
-
Select options This product has multiple variants. The options may be chosen on the product page Quick View$0.30DS-427 12mm 3A Self-Reset
Select options This product has multiple variants. The options may be chosen on the product page -
-
$2.00NRF24L01 is a work in the 2.4-2.5GHz worldwide ISM band single-chip transceiver, wireless transceiver, including: the frequency generator the enhanced SchockBurstTM mode controller power amplifier crystal amplifier modulator demodulator output power channel selection and protocol set by the SPI interface to set a very low current consumption, lower current consumption […]
-
$0.75This is ULN2003 Driver Module Stepper Motor Driver Board for driving and controlling stepper motors. ULN2003 Stepper Motor Driver Board uses the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper motor (5v-12v). It’s easy to use Arduino or another development platform to drive the stepper motor by this diver board. […]
-
-
Select options This product has multiple variants. The options may be chosen on the product page Quick View$0.13 – $0.63Capacitor Electrolytic 16V Items Descriptions : Items Name Size 16V 1UF 3x5mm 16V 10UF 3x5mm 16V 22UF 3x5mm 16V 33UF 4x7mm 16V 47UF 4x7mm 16V 100UF 5x7mm 16V 220UF 6x7mm 16V 470UF 8x7mm 16V 680UF 8x12mm 16V 1000UF 8x12mm 16V 2200UF 10x20mm 16V 3000UF 10x20mm 16V 4700UF 13x25mm 16V 6800UF […]
Select options This product has multiple variants. The options may be chosen on the product page -
$2.50The MQ-5 Gas Sensor module is useful for gas leakage detection (in home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. Sensitive for LPG, natural gas, coal gas Output voltage […]
-
$8.50Description Doit ESP32 Development board is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module. The entire solution takes up the least amount of printed circuit board area. This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low […]
-
Select options This product has multiple variants. The options may be chosen on the product page Quick View$3.25 – $14.00Switching Power Supply 24V 2A 50W Size : Length : 110mm Wide : 78mm High : 36mm 24V 3A 75W Size : Length : 110mm Wide : 78mm High : 36mm 24V 5A 120W Size : Length : 199mm Wide : 97mm High : 42mm 24V 10A 250W Size : […]
Select options This product has multiple variants. The options may be chosen on the product page
Concept
Bridge Cable Robot
Cable Inspection Robot is a research project by ArrowDot Company with function to check the quality of cable for bridge which can be used for Neak Loeung Bridge, New Balay Bridge and planned Koh Pich-Koh Norea Bridge. This robot equipped with analyzed camera that can view the cracked point and the vibration level of the cable. Last but not least, this robot can be remote and live up to 500m wirelessly.
