SIM800A_ Nano development board is a high-performance industrial-grade GSM/GPRS module with a rich interface, perfect function, stable operation, strong anti-interference, high integration of peripheral circuits and small size. It is especially suitable for various fields that require voice/SMS/GPRS data services, such as smart home, intelligent collection system, remote monitoring and so on.
Features:
Support dual-band GSM/GPRS (900MHz / 1800MHz)
Support RS232/TTL serial port (supports 3. 3V/5V system)
Support 5V- 18V power supply (9V1A power supply is recommended)
Reserved voice interface
Reserve SMA and IPX interfaces
Support SMS service MT/M0/Text/PDU mode
Support TCP/UDP communication, FTP/HTTP service
Support Nano SIM card
Pin description:
PWR: Positive power supply
DTR: DTR
RI: RI output pin
RES: reset foot
M+: Mic+
M-: Mic-
S+: horn positive
S-: horn negative
GND: power ground
BAT: Lithium battery power supply interface
EN: Power enable, default high
VCC_IN: external power input
TXD: TTL serial output
RXD: TTL serial input
V_MCU: Level matching interface
R_232: RS232 serial input
T_232: RS232 serial output
SIM800A Chip:
Main Characteristics:
Two-frequency 900/1800MHz
GPRS multi-slot class 12/10
GPRS m0bile station class B
Meet the GSM 2/2+ standard
– Class 4 (2W @900MHz)
– Class 1 (1W @1800MHz)
Size: 24*24*3mm
Controlled by AT c0mmands (GSM 07.07, 07.05 and SIMCOM enhanced AT c0mmand set)
Supply voltage: 3.4 ~ 4.4V
Low power consumption
Operating temperature: -40°C ~ +85°C
Data Transmission:
GPRS class 12: Maximum 85.6 kbps (downstream rate)
The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega 2560 board is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila.
Select options
This product has multiple variants. The options may be chosen on the product page
The OLED displays are one of the most attractive displays available for a microcontroller. It has a good view angle and pixel density which makes it reliable for displaying small level graphics. Interfacing this IC with MCU can either be done using IIC or using SPI hence helps to save some pins as well.
So if you are looking for a slim, attractive and efficient display module to make your project look cool with graphics then this module might be the right choice for you.
Reviews
There are no reviews yet.